HP 8360 L Series - Page 426

general model, l-106
transition filter, I-107
status register structure, SCPI, S-47
status system
overview, l-106
*STB?, S-14
step attenuator, A-6
step control master, S-56
step control slave, S-57
step dwell, S-59
stepped frequency mode, dwell time, S-59
stepped mode, number of points, S-59
stepped sweep coupled, D-8
stepped sweep mode, S-66
stepped sweep mode, step size, S-60
step points, S-59
step points dwell time, D-8
step size, S-60
step size, CW frequency, U-2
step size, power level, U-l
step size, swept frequency, U-3
step sweep functions, S-60
step sweep trigger automatic, S-61
step sweep trigger bus, S-62
step sweep trigger external, S-62
stimulus response measurements
programming example, l-77
stop frequency
flatness correction, A-21
frequency list, A-21
stop frequency key, S-63
stop sweep in/out connector, C-4
storage, 3-17
storage registers, 1-16
store instrument state command, S-14
store instrument state key, S-l
string response data
discussed in detail, l-86
subsystem commands, l-67
defined, l-67
graphical tree format, l-68
tabular format, 1-71
summary bit, l-107
suppression of EOL, 1-61
sweep
continuous, C-10
frequency, markers, M-l
power, P-7
SWEep
simplified subsystem command tree, 1-71
sweep complete, wait command, S-15
sweep, example program, 1-93
sweep functions, S-64
sweep LED, 1-6, 1-12
sweep mode
Index-2 1