2. Switch to the Restore context. Expand Restore Objects and Microsoft Volume
Shadow Copy Writers and select the client from which you want to restore the
data.
In the Results Area, expand Microsoft Exchange Writer and select the whole
storage group. Do not select individual stores.
Figure 115 Selecting Microsoft Exchange Server 2003 stores for
point-in-time restore
3. Proceed as with general VSS writer restore. See “Restore procedure” on page 380
for the general VSS writer restore procedure.
4. Mount the stores from the storage group in which the target stores reside using
Exchange System Manager. All stores are mounted and put in the state as they
were at the last selected full, incremental, or differential backup.
Microsoft Exchange Server 2007 writer restore specifics
Microsoft Exchange Server 2007 writer offers an additional restore option:
• Restore to a different location than the location from where the backup was made
(original location). After that, a recovery storage group can be created by Data
Protector.
Integrating the Data Protector ZDB integrations and Microsoft Volume Shadow Copy Service388
To Next Page
Loading...
Need help?
General