4. Optionally, under the Options tab, select VDS options or disk array options.
For both instant recovery types, to retain the source volume, select Retain source
for forensics.
When Restore using HP StorageWorks EVA is selected, aditional options are
available. In case of Microsoft Exchange Server 2007 writer restore to a different
location, these options are not available.
• The restore method: Copy replica data to the source volume or Switch the
replica.
If you select Copy replica data to the source volume, a full copy of the replica
is created in the source storage (the copy is then switched with the source
volume). A virtual copy is created and immediately available for use.
However, in the background, the copy process runs for some time to copy
all data from the replica to the source storage. To avoid the slowdown of
the copy process caused by application use or the integrity check process
(Exchange Server), use this option. The restore resumes after the time specified
in Wait up to n minutes (default: 60) is reached (even if the copy process is
not finished) or after the copy process has finished if it is finished before the
specified time.
• To delete the replica after the restore, select Delete replica after successful
restore.
For details, press F1.
Zero downtime backup integration guide 405
To Next Page
Loading...
Need help?
General