EasyManuals Logo

HP MSR SERIES Command Reference

HP MSR SERIES
684 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #111 background imageLoading...
Page #111 background image
97
Usage guidelines
HWTACACS is based on TCP. When the server response timeout timer or the TCP timeout timer times out,
the device is disconnected from the HWTACACS server.
Examples
# Set the HWTACACS server response timeout timer to 30 seconds for HWTACACS scheme hwt1.
<Sysname> system-view
[Sysname] hwtacacs scheme hwt1
[Sysname-hwtacacs-hwt1] timer response-timeout 30
Related commands
display hwtacacs scheme
user-name-format (HWTACACS scheme view)
Use user-name-format to specify the format of the username to be sent to an HWTACACS server.
Use undo user-name-format to restore the default.
Syntax
user-name-format { keep-original | with-domain | without-domain }
undo user-name-format
Default
The ISP domain name is included in the username.
Views
HWTACACS scheme view
Predefined user roles
network-admin
Parameters
keep-original: Sends the username to the HWTACACS server as the username is entered.
with-domain: Includes the ISP domain name in the username sent to the HWTACACS server.
without-domain: Excludes the ISP domain name from the username sent to the HWTACACS server.
Usage guidelines
A username is generally in the format userid@isp-name, of which isp-name is used by the device to
determine the ISP domain to which a user belongs. However, some HWTACACS servers cannot
recognize a username containing an ISP domain name. Before sending a username including a domain
name to such an HWTACACS server, the device must remove the domain name. This command allows
you to specify whether to include a domain name in a username to be sent to an HWTACACS server.
If an HWTACACS scheme defines that the username is sent without the ISP domain name, do not apply
the HWTACACS scheme to more than one ISP domain. Otherwise, the HWTACACS server will consider
two users in different ISP domains but with the same userid as one user.
If the HWTACACS scheme is used for wireless users, specify the format of the username to be sent from
the access device to the HWTACACS server as keep-original. Otherwise, authentication of the wireless
users might fail.

Table of Contents

Other manuals for HP MSR SERIES

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the HP MSR SERIES and is the answer not in the manual?

HP MSR SERIES Specifications

General IconGeneral
Product SeriesMSR Series
ManufacturerHP
CategoryNetwork Router
PortsVaries by model
WAN InterfacesVaries by model
LAN InterfacesVaries by model
VPN SupportYes
FirewallYes
DimensionsVaries by model
WeightVaries by model
Wireless SupportVaries by model
ManagementWeb-based, CLI
Power SupplyVaries by model
Operating Temperature0°C to 45°C
Storage Temperature-40°C to 70°C
Humidity5% to 95% non-condensing

Related product manuals