HP MSR SERIES Command Reference

240
ssh-dss
AAAAB3NzaC1kc3MAAACBANdXJixFhMRMIR8YvZbl8GHE8KQj9/5ra4WzTO9yzhSg06UiL+CM7OZb5sJlhUiJ3
B7b0T7IsnTan3W6Jsy5h3I2Anh+kiuoRCHyLDyJy5sG/WD+AZQd3Xf+axKJPadu68HRKNl/BnjXcitTQchQbz
WCFLFqL6xLNolQOHgRx9ozAAAAFQDHcyGMc37I7pk7Ty3tMPSO2s6RXwAAAIEAgiaQCeFOxHS68pMuadOx8YU
XrZWUGEzN/OrpbsTV75MTPoS0cJPFKyDNNdAkkrOVnsZJliW8T6UILiLFs3ThbdABMs5xsCAhcJGscXthI5HH
bB+y6IMXwb2BcdQey4PiEMA8ybMugQVhwhYhxz1tqsAo9LFYXaf0JRlxjMmwnu8AAACBAKHkVsjaKtG7g7G98
qGmtaboNkK0YEAkRdp+QDZxX0aPdmVeEU1GC3ES9XFD7gIK70pb+tB7dA+8scZNqKK85hkoNCFEXux3088NEY
ZullatZRH0km+DdpZ7CrcV+ft7UUvBF0FV3W4HOx/LOidJ5sX+qBAD4WcpSX0OrZEF4+dq dsa-key
Related commands
• public-key local create
• public-key peer import sshkey
public-key local export rsa
Use public-key local export rsa to display the local RSA host public key in a specific format, or export the
key to a specific file.
Syntax
In non-FIPS mode:
public-key local export rsa [ name key-name ] { openssh | ssh1 | ssh2 } [ filename ]
In FIPS mode:
public-key local export rsa [ name key-name ] { openssh | ssh2 } [ filename ]
Views
System view
Predefined user roles
network-admin
Parameters
name key-name: Specifies the name of a local RSA key pair. The key-name argument is a case-insensitive
string of 1 to 64 characters, including letters, digits, and hyphens (-). If no name is provided, the
command displays or exports the host public key of the local DSA key pair with the default name.
openssh: Uses the format of OpenSSH.
ssh1: Uses the format of SSH1.5.
ssh2: Uses the format of SSH2.0.
filename: Specifies a file for saving the local host public key. The file name is a case-insensitive string of
1 to 128 characters, which cannot be hostkey, serverkey, dsakey, ecdsakey, or all dots (.). In addition, it
cannot start with a forward slash (/) or contain characters ./ or ../. For more information about file
names, see Fundamentals Configuration Guide.
Usage guidelines
Whether the command exports or displays the host public key depends on the presence of the filename
argument.
You can use the command to display or export the local RSA host public keys before distributing it to a
peer device.
1. Save the local host public key to a file with one of the following methods:

HP MSR SERIES Specifications

General

Product Series	MSR Series
Manufacturer	HP
Category	Network Router
Ports	Varies by model
WAN Interfaces	Varies by model
LAN Interfaces	Varies by model
VPN Support	Yes
Firewall	Yes
Dimensions	Varies by model
Weight	Varies by model
Wireless Support	Varies by model
Management	Web-based, CLI
Power Supply	Varies by model
Operating Temperature	0°C to 45°C
Storage Temperature	-40°C to 70°C
Humidity	5% to 95% non-condensing