HP MSR SERIES

448
app1 User-defined 0x80000001
bapp3 User-defined 0x80000006
pop3 Pre-defined 0x00000e75
smtp Pre-defined 0x00001135
Table 57 Command output
Field Description
Group name Application group name.
Group ID Application group ID.
Type
Application protocol or application group attribute:
• Pre-defined.
• User-defined.
Application count
Number of application protocols in the application
group.
Include application list Application group application protocol list.
Application name Application protocol name.
App ID Application protocol ID.
Related commands
• app-group
• include
display application
Use display application to display information about the specified application protocols.
Syntax
display application [ name application-name | pre-defined | user-defined ]
Views
User view
Predefined user roles
network-admin
network-operator
Parameters
name application-name: Specifies an application protocol by its name. The application-name argument
is a case-insensitive string of 1 to 63 characters.
pre-defined: Specifies the pre-defined application protocols.
user-defined: Specifies the user-defined application protocols.
Usage guidelines
If you do not specify any parameters, this command displays information about all application protocols.