HP MSR SERIES Command Reference

178
portal max-user
Use portal max-user to set the maximum number of total portal users allowed in the system.
Use undo portal max-user to restore the default.
Syntax
portal max-user max-number
undo portal max-user
Default
The total number of portal users allowed in the system is not limited.
Views
System view
Predefined user roles
network-admin
Parameters
max-number: Specifies the maximum number of total portal users in the range of 1 to 4294967295.
Usage guidelines
If you configure the maximum total number smaller than the number of current portal users on the device,
this command still takes effect. The online users are not affected by this command, but the system forbids
new portal users to log in.
This command set the maximum number of online IPv4 and IPv6 portal users in all.
Examples
# Set the maximum number of online portal users allowed in the system to 100.
<Sysname> system-view
[Sysname] portal max-user 100
Related commands
display portal user
portal roaming enable
Use portal roaming enable to enable portal roaming.
Use undo portal roaming enable to disable portal roaming.
Syntax
portal roaming enable
undo portal roaming enable
Default
Portal roaming is disabled. An online portal user cannot roam in its VLAN.
Views
System view

HP MSR SERIES Specifications

General

Product Series	MSR Series
Manufacturer	HP
Category	Network Router
Ports	Varies by model
WAN Interfaces	Varies by model
LAN Interfaces	Varies by model
VPN Support	Yes
Firewall	Yes
Dimensions	Varies by model
Weight	Varies by model
Wireless Support	Varies by model
Management	Web-based, CLI
Power Supply	Varies by model
Operating Temperature	0°C to 45°C
Storage Temperature	-40°C to 70°C
Humidity	5% to 95% non-condensing