HP MSR SERIES Command Reference

132
• dot1x smarton timer supp-timeout
dot1x smarton switchid
Use dot1x smarton switchid to configure a SmartOn switch ID.
Use undo dot1x smarton switchid to restore the default.
Syntax
dot1x smarton switchid switch-string
undo dot1x smarton switchid
Default
No SmartOn switch ID is configured.
Views
System view
Predefined user roles
network-admin
Parameters
switch-string: Specifies the SmartOn switch ID, a case-sensitive string of 1 to 30 characters.
Usage guidelines
The device checks the SmartOn switch ID in each received EAP-Response/Notification packet. If the
switch ID is not the same as the switch ID on the device, the device stops the 802.1X authentication
process for the client that sends this packet.
Examples
# Configure the SmartOn switch ID as abc.
<Sysname> system-view
[Sysname] dot1x smarton switchid abc
Related commands
• display dot1x
• dot1x smarton
• dot1x smarton password
dot1x smarton timer supp-timeout
Use dot1x smarton timer supp-timeout to set the SmartOn client timeout timer.
Use undo dot1x smarton timer supp-timeout to restore the default.
Syntax
dot1x smarton timer supp-timeout time-value
undo dot1x smarton timer supp-timeout
Default
The SmartOn client timeout timer is 30 seconds.

HP MSR SERIES Specifications

General

Product Series	MSR Series
Manufacturer	HP
Category	Network Router
Ports	Varies by model
WAN Interfaces	Varies by model
LAN Interfaces	Varies by model
VPN Support	Yes
Firewall	Yes
Dimensions	Varies by model
Weight	Varies by model
Wireless Support	Varies by model
Management	Web-based, CLI
Power Supply	Varies by model
Operating Temperature	0°C to 45°C
Storage Temperature	-40°C to 70°C
Humidity	5% to 95% non-condensing