HP MSR SERIES

127
Default
The quiet timer is disabled.
Views
System view
Predefined user roles
network-admin
Usage guidelines
When a client fails 802.1X authentication, the device must wait a period of time before it can process
authentication requests from the client. You can use the dot1x timer quiet-period command to set the
quieter timer.
Examples
# Enable the quiet timer and set the quiet timer to 100 seconds.
<Sysname> system-view
[Sysname] dot1x quiet-period
[Sysname] dot1x timer quiet-period 100
Related commands
• display dot1x
• dot1x timer
dot1x re-authenticate
Use dot1x re-authenticate to enable the periodic online user reauthentication function.
Use undo dot1x re-authenticate to disable the function.
Syntax
dot1x re-authenticate
undo dot1x re-authenticate
Default
The periodic online user reauthentication function is disabled.
Views
Ethernet interface view
Predefined user roles
network-admin
Usage guidelines
Periodic reauthentication enables the access device to periodically authenticate online 802.1X users on
a port. This function tracks the connection status of online users and updates the authorization attributes
assigned by the server, such as the VLAN.
You can use the dot1x timer reauth-period command to configure the interval for reauthentication.
Examples
# Enable the 802.1X periodic online user reauthentication function on GigabitEthernet 2/1/1 and set
the periodic reauthentication interval to 1800 seconds.