HP MSR SERIES Command Reference

584
Table 86 Command output
Field Descri
p
tion
Totally 3 flood protected IP
addresses
Total number of the IPv6 addresses protected by flood attack detection and
prevention.
IPv6 address Protected IPv6 address.
VPN instance
MPLS L3VPN instance to which the protected IPv6 address belongs. If the
protected IPv6 address is on the public network, this field displays hyphens
(--).
Type Type of the flood attack.
Rate threshold(PPS)
Threshold for triggering the flood attack prevention, in units of packets sent
to the IPv6 address per second.
Dropped
Number of dropped attack packets. If the prevention action is logging, this
field displays 0.
display attack-defense scan attacker ip
Use display attack-defense scan attacker ip to display information about IPv4 scanning attacker.
Syntax
MSR1000/MSR2000/MSR3000:
display attack-defense scan attacker ip [ interface interface-type interface-number | local ] [ count ]
MSR4000:
display attack-defense scan attacker ip [ interface interface-type interface-number | local ] [ slot
slot-number ] [ count ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
interface interface-type interface-number: Specifies an interface by its type and number.
local: Specifies the device.
slot slot-number: Specifies a card by its slot number. This option is available only when you specify a
global interface, such as a VLAN interface or tunnel interface. (MSR4000.)
count: Displays the number of matching IPv4 scanning attackers.
Usage guidelines
If no parameter is specified, this command displays information about all IPv4 scanning attackers.
Examples
# (MSR1000/MSR2000/MSR3000.) Display information about all IPv4 scanning attackers.
<Sysname> display attack-defense scan attacker ip

HP MSR SERIES Specifications

General

Brand	HP
Model	MSR SERIES
Category	Network Router
Language	English