HP MSR SERIES Command Reference

99
Use undo authentication-server to remove the LDAP authentication server.
Syntax
authentication-server server-name
undo authentication-server server-name
Default
No LDAP authentication server is specified.
Views
LDAP scheme view
Predefined user roles
network-admin
Parameters
server-name: Specifies the name of an existing LDAP server, a case-insensitive string of 1 to 64
characters.
Usage guidelines
For an LDAP scheme, you can only specify one LDAP authentication server. If you execute the command
for an LDAP scheme multiple times, the most recent configuration takes effect.
Examples
# Specify the LDAP authentication server as ccc.
<Sysname> system-view
[Sysname] ldap scheme ldap1
[Sysname-ldap-ldap1] authentication-server ccc
Related commands
• display ldap scheme
• ldap server
display ldap scheme
Use display ldap scheme to display the LDAP scheme configuration.
Syntax
display ldap scheme [ scheme-name ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
scheme-name: Specifies an LDAP scheme by its name, a case-insensitive string of 1 to 32 characters. If
you do not specify an LDAP scheme, this command displays the configuration of all LDAP schemes.

HP MSR SERIES Specifications

General

Product Series	MSR Series
Manufacturer	HP
Category	Network Router
Ports	Varies by model
WAN Interfaces	Varies by model
LAN Interfaces	Varies by model
VPN Support	Yes
Firewall	Yes
Dimensions	Varies by model
Weight	Varies by model
Wireless Support	Varies by model
Management	Web-based, CLI
Power Supply	Varies by model
Operating Temperature	0°C to 45°C
Storage Temperature	-40°C to 70°C
Humidity	5% to 95% non-condensing