HP MSR SERIES - APR Commands; App-Group; Application Statistics Enable

443
APR commands
app-group
Use app-group to create an application group and enter application group view.
Use undo app-group to remove the specified application group.
Syntax
app-group group-name
undo app-group group-name
Default
Multiple pre-defined application groups exist on the device.
Views
System view
Predefined user roles
network-admin
Parameters
group-name: Specifies an application group by its name, a case-insensitive string of 1 to 63 characters.
Valid characters include digits, letters, hyphens (-), and underlines (_). Names, such as "invalid" or
"other", and names of the pre-defined application groups are not allowed.
Usage guidelines
You can create up to 65535 application groups on the device.
You can use the display app-group pre-defined command to display the pre-defined application groups.
Examples
# Create application group aaa and enter application group view.
<Sysname> system-view
[Sysname] app-group aaa
[Sysname-app-group-aaa]
Related commands
• copy app-group
• description
• include application
application statistics enable
Use application statistics enable to enable the application statistics function on an interface.
Use undo application statistics enable to disable the application statistics function on an interface.