HP MSR SERIES

219
<Sysname> system-view
[Sysname] password-control length 16
# Set the minimum password length to 16 characters for user group test.
[Sysname] user-group test
[Sysname-ugroup-test] password-control length 16
[Sysname-ugroup-test] quit
# Set the minimum password length to 16 characters for device management user abc.
[Sysname] local-user abc class manage
[Sysname-luser-manage-abc] password-control length 16
Related commands
• display local-user
• display password-control
• display user-group
• password-control length enable
password-control login idle-time
Use password-control login idle-time to set the maximum account idle time. If a user account is idle for
this period of time, you can no longer use this account to log in to the device.
Use undo password-control login idle-time to restore the default.
Syntax
password-control login idle-time idle-time
undo password-control login idle-time
Default
You cannot use a user account to log in to the device if the account has been idle for 90 days.
Views
System view
Predefined user roles
network-admin
Parameters
idle-time: Specifies the maximum account idle time in days, in the range of 0 to 365. 0 means no
restriction for account idle time.
Usage guidelines
If a user has not been logged in within the specified idle time since the last successful login, the user
account becomes invalid.
Examples
# Set the maximum account idle time to 30 days.
<Sysname> system-view
[Sysname] password-control login idle-time 30