HP MSR SERIES Command Reference

656
Examples
# Set the global threshold to 100 for triggering SYN flood attack prevention in attack defense policy
atk-policy-1.
<Sysname> system-view
[Sysname] attack-defense policy atk-policy-1
[Sysname-attack-defense-policy-atk-policy-1] syn-flood threshold 100
Related commands
• syn-flood action
• syn-flood detect
• syn-flood detect non-specific
udp-flood action
Use udp-flood action to specify global actions against UDP flood attacks.
Use undo udp-flood action to restore the default.
Syntax
udp-flood action { drop | logging } *
undo udp-flood action
Default
No action is taken against detected UDP flood attacks.
Views
Attack defense policy view
Predefined user roles
network-admin
Parameters
drop: Drops subsequent UDP packets destined for the victim IP addresses.
logging: Enables logging for UDP flood attack events. The log information records the detection interface,
victim IP address, MPLS L3VPN instance name, current packet statistics, prevention actions, and start time
of the attack.
Examples
# Specify drop as the global action against UDP flood attacks in attack defense policy atk-policy-1.
<Sysname> system-view
[Sysname] attack-defense policy atk-policy-1
[Sysname-attack-defense-policy-atk-policy-1] udp-flood action drop
Related commands
• udp-flood detect
• udp-flood detect non-specific
• udp-flood threshold

HP MSR SERIES Specifications

General

Product Series	MSR Series
Manufacturer	HP
Category	Network Router
Ports	Varies by model
WAN Interfaces	Varies by model
LAN Interfaces	Varies by model
VPN Support	Yes
Firewall	Yes
Dimensions	Varies by model
Weight	Varies by model
Wireless Support	Varies by model
Management	Web-based, CLI
Power Supply	Varies by model
Operating Temperature	0°C to 45°C
Storage Temperature	-40°C to 70°C
Humidity	5% to 95% non-condensing