HP MSR SERIES Command Reference

29
• domain if-unknown
• state (ISP domain view)
domain default enable
Use domain default enable to specify the default ISP domain. Users without any domain name included
in the usernames are considered in the default domain.
Use undo domain default enable to restore the default.
Syntax
domain default enable isp-name
undo domain default enable
Default
The default ISP domain is the system-defined ISP domain system.
Views
System view
Predefined user roles
network-admin
Parameters
isp-name: Specifies the ISP domain name, a case-insensitive string of 1 to 255 characters.
Usage guidelines
There can be only one default ISP domain.
The specified ISP domain must already exist.
An ISP domain cannot be deleted when it is used as the default ISP domain. Before you use the undo
domain command, change the domain to a non-default ISP domain by using the undo domain default
enable command.
Examples
# Create an ISP domain named test, and configure the domain as the default ISP domain.
<Sysname> system-view
[Sysname] domain test
[Sysname-isp-test] quit
[Sysname] domain default enable test
Related commands
• display domain
• domain
domain if-unknown
Use domain if-unknown to specify an ISP domain for users that include unknown domain names.
Use undo domain if-unknown to restore the default.

HP MSR SERIES Specifications

General

Product Series	MSR Series
Manufacturer	HP
Category	Network Router
Ports	Varies by model
WAN Interfaces	Varies by model
LAN Interfaces	Varies by model
VPN Support	Yes
Firewall	Yes
Dimensions	Varies by model
Weight	Varies by model
Wireless Support	Varies by model
Management	Web-based, CLI
Power Supply	Varies by model
Operating Temperature	0°C to 45°C
Storage Temperature	-40°C to 70°C
Humidity	5% to 95% non-condensing