HP MSR SERIES Command Reference

587
Totally 3 attackers.
Slot 1:
Totally 3 attackers.
Table 88 Command output
Field Descri
p
tion
Totally 3 attackers Total number of IPv6 scanning attackers.
IPv6 address IPv6 address of the attacker.
VPN instance
MPLS L3VPN instance to which the attacker IPv6 address belongs. If the
attacker IPv6 address is on the public network, this field displays hyphens
(--).
Detected on Where the attack is detected, on the device (Local) or an interface.
Duration(min) How long the attack lasts, in minutes.
Related commands
• display attack-defense scan victim ipv6
• scan detect
display attack-defense scan victim ip
Use display attack-defense scan victim ip to display information about IPv4 scanning attack victims.
Syntax
MSR1000/MSR2000/MSR3000:
display attack-defense scan victim ip [ interface interface-type interface-number | local ] [ count ]
MSR4000:
display attack-defense scan victim ip [ interface interface-type interface-number | local ] [ slot
slot-number ] [ count ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
interface interface-type interface-number: Specifies an interface by its type and number.
local: Specifies the device.
slot slot-number: Specifies a card by its slot number. This option is available only when you specify a
global interface, such as a VLAN interface or tunnel interface. (MSR4000.)
count: Displays the number of matching IPv4 scanning attack victims.
Usage guidelines
If no parameter is specified, this command displays information about all IPv4 scanning attack victims.

HP MSR SERIES Specifications

General

Brand	HP
Model	MSR SERIES
Category	Network Router
Language	English