HP MSR SERIES Command Reference

378
<Sysname> system-view
[Sysname] ike keychain key1
[Sysname-ike-keychain-key1] priority 10
priority (IKE profile view)
Use priority to specify a priority for an IKE profile.
Use undo priority to restore the default.
Syntax
priority number
undo priority
Default
The priority of an IKE profile is 100.
Views
IKE profile view
Predefined user roles
network-admin
Parameters
priority number: Specifies a priority number in the range of 1 to 65535. The smaller the priority number,
the higher the priority.
Usage guidelines
To determine the priority of an IKE profile, the device examines the existence of the match local address
command before examining the priority number. An IKE profile with the match local address command
configured has a higher priority than an IKE profile that does not have the match local address command
configured.
Examples
# Set the priority to 10 for IKE profile prof1.
<Sysname> system-view
[Sysname] ike profile prof1
[Sysname-ike-profile-prof1] priority 10
proposal
Use proposal to specify the IKE proposals for an IKE profile to reference.
Use undo proposal to remove the IKE proposal references.
Syntax
proposal proposal-number&<1-6>
undo proposal
Default
An IKE profile references no IKE proposals and uses the IKE proposals configured in system view for IKE
negotiation.

HP MSR SERIES Specifications

General

Product Series	MSR Series
Manufacturer	HP
Category	Network Router
Ports	Varies by model
WAN Interfaces	Varies by model
LAN Interfaces	Varies by model
VPN Support	Yes
Firewall	Yes
Dimensions	Varies by model
Weight	Varies by model
Wireless Support	Varies by model
Management	Web-based, CLI
Power Supply	Varies by model
Operating Temperature	0°C to 45°C
Storage Temperature	-40°C to 70°C
Humidity	5% to 95% non-condensing