218
Related commands
• display password-control
• password-control history enable
• reset password-control blacklist
password-control length
Use password-control length to set the minimum password length.
Use undo password-control length to restore the default.
Syntax
password-control length length
undo password-control length
Default
In non-FIPS mode, the global minimum password length is 10 characters.
In FIPS mode, the global minimum password length is 15 characters.
In both non-FIPS and FIPS modes, the minimum password length for a user group equals the global
setting. The minimum password length for a local user equals that of the user group to which the local
user belongs.
Views
System view, user group view, local user view
Predefined user roles
network-admin
Parameters
length: Specifies the minimum password length in characters. The value range for this argument is 4 to
32 in non-FIPS mode, and 15 to 32 in FIPS mode.
Usage guidelines
Before you execute this command, make sure the global password control feature and the minimum
length function are enabled. Otherwise, your configuration cannot take effect.
The minimum length setting depends on the view:
• The setting in system view has global significance and applies to all user groups.
• The setting in user group view applies to all local users in the user group.
• The setting in local user view applies only to the local user.
A minimum password length with a smaller application scope has higher priority. The system prefers to
use the minimum password length in local user view for a local user.
• If no minimum password length is configured for the local user, the system uses the minimum
password length for the user group to which the local user belongs.
• If no minimum password length is configured for the user group, the system uses the global minimum
password length.
Examples
# Set the global minimum password length to 16 characters.
To Next Page
Loading...
Need help?
General
