HP MSR SERIES Command Reference

658
[Sysname-attack-defense-policy-atk-policy-1] udp-flood detect ip 192.168.1.2 threshold
2000
Related commands
• udp-flood action
• udp-flood detect non-specific
• udp-flood threshold
udp-flood detect non-specific
Use udp-flood detect non-specific to enable UDP flood attack detection for non-specific IP addresses.
Use undo udp-flood detect non-specific to restore the default.
Syntax
udp-flood detect non-specific
undo udp-flood detect non-specific
Default
UDP flood attack detection is not enabled for non-specific IP addresses.
Views
Attack defense policy view
Predefined user roles
network-admin
Usage guidelines
This command enables global UDP flood attack detection. It applies to all IP addresses except for those
specified by the udp-flood detect command. The system uses the global trigger threshold set by the
udp-flood threshold command and global actions specified by the udp-flood action command.
Examples
# Enable UDP flood attack detection for non-specific IP addresses in attack defense policy atk-policy-1.
<Sysname> system-view
[Sysname] attack-defense policy atk-policy-1
[Sysname-attack-defense-policy-atk-policy-1] udp-flood detect non-specific
Related commands
• udp-flood action
• udp-flood detect
• udp-flood threshold
udp-flood threshold
Use udp-flood threshold to set the global threshold for triggering UDP flood attack prevention.
Use undo udp-flood threshold to restore the default.
Syntax
udp-flood threshold threshold-value

HP MSR SERIES Specifications

General

Brand	HP
Model	MSR SERIES
Category	Network Router
Language	English