HP MSR SERIES Command Reference

502
Object group commands
description
Use description to configure a description for an object group.
Use undo description to delete the description for an object group.
Syntax
description text
undo description
Default
An object group does not have a description.
Views
Object group view
Predefined user roles
network-admin
Parameters
text: Configures an object group description, a case-sensitive string of 1 to 127 characters.
Examples
# Configure a description for IPv4 address object group ipgroup.
<Sysname> system-view
[Sysname] object-group ip address ipgroup
[Sysname-obj-grp-ip-ipgroup]
description This is an IPv4 object-group
display object group
Use display object group to display information about object groups.
Syntax
display object-group [ { { ip | ipv6 } address | service | port } [ default ] [ name object-group-name ] |
name object-group-name ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
ip address: Specifies the IPv4 address object group.

HP MSR SERIES Specifications

General

Product Series	MSR Series
Manufacturer	HP
Category	Network Router
Ports	Varies by model
WAN Interfaces	Varies by model
LAN Interfaces	Varies by model
VPN Support	Yes
Firewall	Yes
Dimensions	Varies by model
Weight	Varies by model
Wireless Support	Varies by model
Management	Web-based, CLI
Power Supply	Varies by model
Operating Temperature	0°C to 45°C
Storage Temperature	-40°C to 70°C
Humidity	5% to 95% non-condensing