HP MSR SERIES Command Reference

76
undo timer response-timeout
Default
The RADIUS server response timeout period is 3 seconds.
Views
RADIUS scheme view
Predefined user roles
network-admin
Parameters
seconds: Specifies the RADIUS server response timeout period, in the range of 1 to 10 seconds.
Usage guidelines
If a NAS receives no response from the RADIUS server in a period of time after sending a RADIUS request,
it resends the request so that the user has more opportunity to obtain the RADIUS service. The NAS uses
the RADIUS server response timeout timer to control the transmission interval.
The maximum number of RADIUS packet transmission attempts multiplied by the RADIUS server response
timeout period cannot be greater than 300.
Examples
# Set the RADIUS server response timeout timer to 5 seconds for RADIUS scheme radius1.
<Sysname> system-view
[Sysname] radius scheme radius1
[Sysname-radius-radius1] timer response-timeout 5
Related commands
• display radius scheme
• retry
user-name-format (RADIUS scheme view)
Use user-name-format to specify the format of the username to be sent to a RADIUS server.
Use undo user-name-format to restore the default.
Syntax
user-name-format { keep-original | with-domain | without-domain }
undo user-name-format
Default
The ISP domain name is included in the username.
Views
RADIUS scheme view
Predefined user roles
network-admin
Parameters
keep-original: Sends the username to the RADIUS server as the username is entered.

HP MSR SERIES Specifications

General

Brand	HP
Model	MSR SERIES
Category	Network Router
Language	English