HP MSR SERIES

98
Examples
# Configure the device to remove the ISP domain name from the username sent to the HWTACACS
servers specified in HWTACACS scheme hwt1.
<Sysname> system-view
[Sysname] hwtacacs scheme hwt1
[Sysname-hwtacacs-hwt1] user-name-format without-domain
Related commands
display hwtacacs scheme
vpn-instance (HWTACACS scheme view)
Use vpn-instance to specify a VPN for an HWTACACS scheme.
Use undo vpn-instance to remove the configuration.
Syntax
vpn-instance vpn-instance-name
undo vpn-instance
Default
The HWTACACS scheme belongs to the public network.
Views
HWTACACS scheme view
Predefined user roles
network-admin
Parameters
vpn-instance-name: Name of the MPLS L3VPN, a case-sensitive string of 1 to 31 characters.
Usage guidelines
The VPN specified here takes effect for all servers in the HWTACACS scheme for which no VPN is
specified.
Examples
# Specify VPN test for HWTACACS scheme hwt1.
<Sysname> system-view
[Sysname] hwtacacs scheme hwt1
[Sysname-hwtacacs-hwt1] vpn-instance test
Related commands
display hwtacacs scheme
LDAP commands
authentication-server
Use authentication-server to specify the LDAP authentication server for an LDAP scheme.