242
[Sysname] public-key local export rsa name rsa1 openssh
ssh-rsa
AAAAB3NzaC1yc2EAAAADAQABAAAAgQDevEbyF93xHUJucJWqRc1r8fhzQ9lSVprCI6ATZeDYyR1J00fBQ8XY+
q2olqoagn5YDyUC8ZJvUhlyMOHeORpkAVxD3XncTp4XG66h3rTHHa7Xmm7f1GDYlF0n05t8mCLVaupbfCzP8b
a8UkrUmMO4fUvW6zavA5LYxtlAiQv0KQ== rsa-key
Related commands
• public-key local create
• public-key peer import sshkey
public-key peer
Use public-key peer to specify a name for a peer public key and enter public key view.
Use undo public-key peer to delete a peer public key.
Syntax
public-key peer keyname
undo public-key peer keyname
Default
The device has no peer public keys.
Views
System view
Predefined user roles
network-admin
Parameters
keyname: Specifies a name for a peer public key, a case-sensitive string of 1 to 64 characters.
Usage guidelines
After you execute the command to enter the public key view, type the public key. Spaces and carriage
returns are allowed, but are not saved.
To manually specify a peer public key on the local device, obtain the public key in hexadecimal from the
peer device beforehand, and then perform the following operations on the local device:
1. Execute the public-key peer command to enter public key view.
2. Type the public key.
3. Execute the peer-public-key end command to save the public key and return to system view.
The public key you type in the public key view must be in a correct format. If your device is an HP device,
use the display public-key local public command to display and record its public key.
Examples
# Specify the name key1 for a peer public key and enter public key view.
<Sysname> system-view
[Sysname] public-key peer key1
[Sysname-pkey-public-key-key1]
To Next Page
Loading...
Need help?
General
