HP MSR SERIES Command Reference

241
{ Use the public-key local export rsa [ name key-name ] { openssh | ssh2 } command to display
the host public key in the specified format, copy and paste it to a file.
{ Use the public-key local export rsa [ name key-name ] { openssh | ssh2 } filename command to
export the host public key to the file. You cannot export the host public key to the folder pkey
and its subfolders.
2. Transfer a copy of the file to the peer device, for example, by using FTP or TFTP in binary mode.
3. On the peer device, use the public-key peer import sshkey command to import the host public key
from the file.
SSH1.5, SSH2.0 and OpenSSH are different public key formats. Choose the proper format that is
supported on the device where you import the host public key. In FIPS mode, the device only supports
SSH2.0 and OpenSSH.
Examples
# Export the host public key of the local RSA key pair with the default name in OpenSSH format to the
file key.pub.
<Sysname> system-view
[Sysname] public-key local export rsa openssh key.pub
# Display the host public key of the local RSA key pair with the default name in SSH2.0 format.
<Sysname> system-view
[Sysname] public-key local export rsa ssh2
---- BEGIN SSH2 PUBLIC KEY ----
Comment: "rsa-key-2011/05/12"
AAAAB3NzaC1yc2EAAAADAQABAAAAgQDapKr+/gTCyWZyabuCJuJjMeMPQaj/kixzOCCAl+hDMmEGMrSfddq/b
YcbgM7Buit1AgB3x0dFyTPi85DcCznTW4goPXAKFjuzCbGfj4chakSr+/aj1k3rM+XOvyvPJilneKJqhPT0xd
v4tlas+mLNloY0dImbwS2kwE71rgg1CQ==
---- END SSH2 PUBLIC KEY ----
# Display the host public key of the local RSA key pair with the default name in OpenSSH format.
<Sysname> system-view
[Sysname] public-key local export rsa openssh
ssh-rsa
AAAAB3NzaC1yc2EAAAADAQABAAAAgQDapKr+/gTCyWZyabuCJuJjMeMPQaj/kixzOCCAl+hDMmEGMrSfddq/b
YcbgM7Buit1AgB3x0dFyTPi85DcCznTW4goPXAKFjuzCbGfj4chakSr+/aj1k3rM+XOvyvPJilneKJqhPT0xd
v4tlas+mLNloY0dImbwS2kwE71rgg1CQ== rsa-key
# Export the host public key of the local RSA key pair rsa1 in OpenSSH format to the file rsa1.pub.
<Sysname> system-view
[Sysname] public-key local export rsa name rsa1 openssh rsa1.pub
# Display the host public key of the local RSA key pair rsa1 in SSH2.0 format.
<Sysname> system-view
[Sysname] public-key local export rsa name rsa1 ssh2
---- BEGIN SSH2 PUBLIC KEY ----
Comment: "rsa-key-2011/05/12"
AAAAB3NzaC1yc2EAAAADAQABAAAAgQDevEbyF93xHUJucJWqRc1r8fhzQ9lSVprCI6ATZeDYyR1J00fBQ8XY+
q2olqoagn5YDyUC8ZJvUhlyMOHeORpkAVxD3XncTp4XG66h3rTHHa7Xmm7f1GDYlF0n05t8mCLVaupbfCzP8b
a8UkrUmMO4fUvW6zavA5LYxtlAiQv0KQ==
---- END SSH2 PUBLIC KEY ----
# Display the host public key of the local RSA key pair rsa1 in OpenSSH format.
<Sysname> system-view

HP MSR SERIES Specifications

General

Brand	HP
Model	MSR SERIES
Category	Network Router
Language	English