HP MSR SERIES Command Reference

1
AAA commands
The device supports the FIPS mode that complies with NIST FIPS 140-2 requirements. Support for features,
commands, and parameters might differ in FIPS mode and non-FIPS mode. For more information about
FIPS mode, see Security Configuration Guide.
General AAA commands
aaa session-limit
Use aaa session-limit to set the maximum number of concurrent users who can log on to the device
through the specified method.
Use undo aaa session-limit to restore the default maximum number of concurrent users for the specified
login method.
Syntax
In non-FIPS mode:
aaa session-limit { ftp | ssh | telnet } max-sessions
undo aaa session-limit { ftp | ssh | telnet }
In FIPS mode:
aaa session-limit ssh max-sessions
undo aaa session-limit ssh
Default
The maximum number of concurrent users is 32 for each user type.
Views
System view
Predefined user roles
network-admin
Parameters
ftp: FTP users.
ssh: SSH users.
telnet: Telnet users.
max-sessions: Specifies the maximum number of concurrent login users. The value range is 1 to 32.
Usage guidelines
After the maximum number of concurrent login users for a user type exceeds the upper limit, the system
denies the subsequent users of this type.

HP MSR SERIES Specifications

General

Product Series	MSR Series
Manufacturer	HP
Category	Network Router
Ports	Varies by model
WAN Interfaces	Varies by model
LAN Interfaces	Varies by model
VPN Support	Yes
Firewall	Yes
Dimensions	Varies by model
Weight	Varies by model
Wireless Support	Varies by model
Management	Web-based, CLI
Power Supply	Varies by model
Operating Temperature	0°C to 45°C
Storage Temperature	-40°C to 70°C
Humidity	5% to 95% non-condensing