80
Response Timeout Interval(seconds) : 5
Username Format : with-domain
------------------------------------------------------------------
Table 7 Command output
Field Descri
tion
Index Index number of the HWTACACS scheme.
Primary Auth Server Primary HWTACACS authentication server.
Primary Author Server Primary HWTACACS authorization server.
Primary Acct Server Primary HWTACACS accounting server.
Secondary Auth Server Secondary HWTACACS authentication server.
Secondary Author Server Secondary HWTACACS authorization server.
Secondary Acct Server Secondary HWTACACS accounting server.
IP
IP address of the HWTACACS server. If no server is configured, this
field displays Not configured.
Port
Service port of the HWTACACS server. If no port configuration is
performed, this field displays the default port number.
Single-connection
Single connection status:
• Enabled—Establish only one TCP connection for all users to
communicate with the server.
• Disabled—Establish a TCP connection for each user to
communicate with the server.
State Status of the HWTACACS server: active or blocked.
VPN Instance
MPLS L3VPN to which the HWTACACS server or scheme belongs. If
no VPN is specified for the server or scheme, this field displays Not
configured.
NAS IP Address Source IP address for outgoing HWTACACS packets.
Server Quiet Period(minutes) Quiet period for the primary servers, in minutes.
Realtime Accounting Interval(minutes)
Real-time accounting interval, in minutes.
Response Timeout Interval(seconds) HWTACACS server response timeout period, in seconds.
Username Format
Format for the usernames sent to the HWTACACS server. Possible
values include:
• with-domain—Includes the domain name.
• without-domain—Excludes the domain name.
• keep-original—Forwards the username as the username is
entered.
Related commands
reset hwtacacs statistics
hwtacacs nas-ip
Use hwtacacs nas-ip to specify a source IP address for outgoing HWTACACS packets.
To Next Page
Loading...
Need help?
General
