HP MSR SERIES Command Reference

389
You can set a small value for the timeout timer to prevent malicious occupation of TCP connections while
authentications are suspended.
Examples
# Set the SSH user authentication timeout timer to 10 seconds.
<Sysname> system-view
[Sysname] ssh server authentication-timeout 10
Related commands
display ssh server
ssh server compatible-ssh1x enable
Use ssh server compatible-ssh1x enable to enable the SSH server to support SSH1 clients.
Use undo ssh server compatible-ssh1x [ enable ] to disable the SSH server from supporting SSH1 clients.
Syntax
ssh server compatible-ssh1x enable
undo ssh server compatible-ssh1x [ enable ]
Default
The SSH server supports SSH1 clients.
Views
System view
Predefined user roles
network-admin
network-operator
Usage guidelines
This command is not available in FIPS mode.
The configuration takes effect on the clients only at the next login.
Examples
# Enable the SSH server to support SSH1 clients.
<Sysname> system-view
[Sysname] ssh server compatible-ssh1x enable
Related commands
display ssh server
ssh server dscp
Use ssh server dscp to set the DSCP value in the IPv4 packets that the SSH server sends to the SSH clients.
Use undo ssh server dscp to restore the default.
Syntax
ssh server dscp dscp-value

HP MSR SERIES Specifications

General

Product Series	MSR Series
Manufacturer	HP
Category	Network Router
Ports	Varies by model
WAN Interfaces	Varies by model
LAN Interfaces	Varies by model
VPN Support	Yes
Firewall	Yes
Dimensions	Varies by model
Weight	Varies by model
Wireless Support	Varies by model
Management	Web-based, CLI
Power Supply	Varies by model
Operating Temperature	0°C to 45°C
Storage Temperature	-40°C to 70°C
Humidity	5% to 95% non-condensing