HP MSR SERIES

105
Views
LDAP server view
Predefined user roles
network-admin
Parameters
cipher: Sets a ciphertext password.
simple: Sets a plaintext password.
password: Specifies the password string. This argument is case sensitive.
• If simple is specified, the password must be a string of 1 to 128 characters.
• If cipher is specified, the password must be a ciphertext string of 1 to 201 characters.
Usage guidelines
This command is effective only after the login-dn command is configured.
For security purposes, all passwords, including passwords configured in plain text, are saved in
ciphertext.
Examples
# Configure the administrator password to abcdefg in plain text.
<Sysname> system-view
[Sysname] ldap server ccc
[Sysname-ldap-server-ccc] login-password simple abcdefg
Related commands
• display ldap scheme
• login-dn
protocol-version
Use protocol-version to specify the LDAP version.
Use undo protocol-version to restore the default.
Syntax
protocol-version { v2 | v3 }
undo protocol-version
Default
The LDAP version is LDAPv3.
Views
LDAP server view
Predefined user roles
network-admin
Parameters
v2: Specifies the LDAP version LDAPv2.