HP MSR SERIES

236
........................+........+..........+..............+.....+...+..........
..............+.........+..........+...........+........+....+..................
.....+++++++++++++++++++++++++++++++++++++++++++++++++++*
Create the key pair successfully.
# Create a local ECDSA key pair with the name ecdsa1.
<Sysname> system-view
[Sysname] public-key local create ecdsa name ecdsa1
Generating Keys...
Create the key pair successfully.
# In FIPS mode, create a local RSA key pair with the default name.
<Sysname> system-view
[Sysname] public-key local create rsa
The range of public key modulus is (2048 ~ 2048).
It will take a few minutes.Press CTRL+C to abort.
Input the modulus length [default = 2024]:
Generating Keys...
...++++++
.++++++
..++++++++
....++++++++
Create the key pair successfully.
# In FIPS mode, create a local DSA key pair with the default name.
<Sysname> system-view
[Sysname] public-key local create dsa
The range of public key modulus is (2048 ~ 2048).
It will take a few minutes.Press CTRL+C to abort.
Input the modulus length [default = 2024]:
.++++++++++++++++++++++++++++++++++++++++++++++++++*
........+......+.....+......................................+..+................
.......+..........+..............+.............+...+.....+...............+..+...
...+.................+..........+...+....+.......+.....+............+.........+.
........................+........+..........+..............+.....+...+..........
..............+.........+..........+...........+........+....+..................
.....+++++++++++++++++++++++++++++++++++++++++++++++++++*
Create the key pair successfully.
Related commands
• display public-key local public
• public-key local destroy
public-key local destroy
Use public-key local destroy to destroy local key pairs.
Syntax
public-key local destroy { dsa | ecdsa | rsa } [ name key-name ]