12
# Configure ISP domain test to use RADIUS authentication scheme rd for LAN users and use local
authentication as the backup.
<Sysname> system-view
[Sysname] domain test
[Sysname-isp-test] authentication lan-access radius-scheme rd local
Related commands
• authentication default
• hwtacacs scheme
• ldap scheme
• local-user
• radius scheme
authentication login
Use authentication login to specify the authentication method for login users.
Use undo authentication login to restore the default.
Syntax
In non-FIPS mode:
authentication login { hwtacacs-scheme hwtacacs-scheme-name [ radius-scheme radius-scheme-name ]
[ local ] [ none ] | ldap-scheme ldap-scheme-name [ local ] [ none ] | local [ none ] | none |
radius-scheme radius-scheme-name [ hwtacacs-scheme hwtacacs-scheme-name ] [ local ] [ none ] }
undo authentication login
In FIPS mode:
authentication login { hwtacacs-scheme hwtacacs-scheme-name [ radius-scheme radius-scheme-name ]
[ local ] | ldap-scheme ldap-scheme-name [ local ] | local | radius-scheme radius-scheme-name
[ hwtacacs-scheme hwtacacs-scheme-name ] [ local ] }
undo authentication login
Default
The default authentication method of the ISP is used for login users.
Views
ISP domain view
Predefined user roles
network-admin
Parameters
hwtacacs-scheme hwtacacs-scheme-name: Specifies an HWTACACS scheme by its name, a
case-insensitive string of 1 to 32 characters.
ldap-scheme ldap-scheme-name: Specifies an LDAP scheme by its name, a case-insensitive string of 1 to
32 characters.
local: Performs local authentication.
none: Does not perform authentication.
To Next Page
Loading...
Need help?
General
