HP MSR SERIES Command Reference

495
<Sysname> display connection-limit ipv6-stat-nodes interface vlan-interface 10 slot 2
count
Slot 2:
Current limit statistic nodes count is 1.
Table 69 Command output
Field Descri
p
tion
Src IP address Source IPv6 address.
Dst IP address Destination IPv6 address.
VPN instance
MPLS L3VPN to which the IP address belongs. "---" indicates that IP address is on the
public network.
Service
Protocol name and service port number. An unwell-known protocol is displayed as
"unknown(xx)," where "xx" indicates the protocol number. For the ICMP protocol,
"xx" indicates the hexadecimal number of the type and code field, which is
represented in decimal notation.
Sessions threshold
Hi/Lo
Upper connection limit/lower connection limit.
Sessions count Number of current connections.
New session flag
Whether or not new connections can be created:
• Permit—New connections can be created.
• Deny—New connections cannot be created.
Related commands
• connection-limit apply global ipv6-policy
• connection-limit apply ipv6-policy
• connection-limit ipv6-policy
• limit
display connection-limit statistics
Use display connection-limit statistics to display the connection limit statistics globally or on an interface.
Syntax
MSR1000/MSR2000/MSR3000:
display connection-limit statistics { global | interface interface-type interface-number }
MSR4000:
display connection-limit statistics { global | interface interface-type interface-number } [ slot
slot-number ]
Views
User view
Predefined user roles
network-admin
network-operator

HP MSR SERIES Specifications

General

Product Series	MSR Series
Manufacturer	HP
Category	Network Router
Ports	Varies by model
WAN Interfaces	Varies by model
LAN Interfaces	Varies by model
VPN Support	Yes
Firewall	Yes
Dimensions	Varies by model
Weight	Varies by model
Wireless Support	Varies by model
Management	Web-based, CLI
Power Supply	Varies by model
Operating Temperature	0°C to 45°C
Storage Temperature	-40°C to 70°C
Humidity	5% to 95% non-condensing