HP MSR SERIES Command Reference

582
Field Descri
p
tion
VPN instance
MPLS L3VPN instance to which the protected IPv4 address belongs. If the
protected IPv4 address is on the public network, this field displays hyphens
(--).
Type Type of the flood attack.
Rate threshold(PPS)
Threshold for triggering the flood attack prevention, in units of packets sent
to the IP address per second.
Dropped
Number of dropped attack packets. If the prevention action is logging, this
field displays 0.
display attack-defense policy ipv6
Use display attack-defense policy ipv6 to display information about IPv6 addresses protected by flood
attack detection and prevention.
Syntax
MSR1000/MSR2000/MSR3000:
display attack-defense policy policy-name { ack-flood | dns-flood | fin-flood | flood | http-flood |
icmpv6-flood | rst-flood | syn-ack-flood | syn-flood | udp-flood } ipv6 [ ipv6-address [ vpn
vpn-instance-name ] ] [ count ]
MSR4000:
display attack-defense policy policy-name { ack-flood | dns-flood | fin-flood | flood | http-flood |
icmpv6-flood | rst-flood | syn-ack-flood | syn-flood | udp-flood } ipv6 [ ipv6-address [ vpn
vpn-instance-name ] ] [ slot slot-number ] [ count ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
policy-name: Specifies an attack defense policy by its name. The policy name is a case-insensitive string
of 1 to 31 characters. Valid characters include uppercase and lowercase letters, digits, underscores (_),
and hyphens (-).
ack-flood: Specifies ACK flood attack.
dns-flood: Specifies DNS flood attack.
fin-flood: Specifies FIN flood attack.
flood: Specifies all IPv4 flood attacks.
http-flood: Specifies HTTP flood attack.
icmpv6-flood: Specifies ICMPv6 flood attack.
rst-flood: Specifies RST flood attack.
syn-ack-flood: Specifies SYN-ACK flood attack.

HP MSR SERIES Specifications

General

Brand	HP
Model	MSR SERIES
Category	Network Router
Language	English