585
IP address VPN instance DS-Lite tunnel peer Detected on Duration(min)
192.168.31.2 -- -- GE2/1/2 1284
2.2.2.3 -- -- GE2/1/2 23
# (MSR4000.) Display information about all IPv4 scanning attackers.
<Sysname> display attack-defense scan attacker ip
Slot 0:
IP address VPN instance DS-Lite tunnel peer Detected on Duration(min)
192.168.31.2 -- -- GE2/1/2 1284
2.2.2.3 -- -- GE2/1/2 23
Slot 1:
IP address VPN instance DS-Lite tunnel peer Detected on Duration(min)
192.168.31.2 -- -- GE2/1/2 1284
2.2.2.3 -- -- GE2/1/2 23
# (MSR1000/MSR2000/MSR3000.) Display the number of IPv4 scanning attackers.
<Sysname> display attack-defense scan attacker ip count
Totally 3 attackers.
# (MSR4000.) Display the number of IPv4 scanning attackers.
<Sysname> display attack-defense scan attacker ip count
Slot 0:
Totally 3 attackers.
Slot 1:
Totally 3 attackers.
Table 87 Command output
Field Descri
tion
Totally 3 attackers Total number of IPv4 scanning attackers.
IP address IPv4 address of the attacker.
VPN instance
MPLS L3VPN instance to which the attacker's IPv4 address belongs. If the
IPv4 address is on the public network, this field displays hyphens (--).
DS-Lite tunnel peer
Peer address of the DS-Lite tunnel.
If the device is the AFTR of a DS-Lite tunnel, this field displays the B4's
address from which the packet comes.
In other situations, this field displays hyphens (--).
Detected on Where the attack is detected, on the device (Local) or an interface.
Duration(min) How long the attack lasts, in minutes.
Related commands
• display attack-defense scan victim ip
• scan detect
display attack-defense scan attacker ipv6
Use display attack-defense scan attacker ipv6 to display information about IPv6 scanning attackers.
To Next Page
Loading...
Need help?
General
