586
Syntax
MSR1000/MSR2000/MSR3000:
display attack-defense scan attacker ipv6 [ interface interface-type interface-number | local ] [ count ]
MSR4000:
display attack-defense scan attacker ipv6 [ interface interface-type interface-number | local ] [ slot
slot-number ] [ count ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
interface interface-type interface-number: Specifies an interface by its type and number.
local: Specifies the device.
slot slot-number: Specifies a card by its slot number. This option is available only when you specify a
global interface, such as a VLAN interface or tunnel interface. (MSR4000.)
count: Displays the number of matching IPv6 scanning attackers.
Usage guidelines
If no parameter is specified, this command displays information about all IPv6 scanning attacker entries.
Examples
# (MSR1000/MSR2000/MSR3000.) Display information about all IPv6 scanning attackers.
<Sysname> display attack-defense scan attacker ipv6
IPv6 address VPN instance Detected on Duration(min)
2013::2 -- GE2/1/4 1234
1230::22 -- GE2/1/4 10
# (MSR4000.) Display information about all IPv6 scanning attackers.
<Sysname> display attack-defense scan attacker ipv6
Slot 0:
IPv6 address VPN instance Detected on Duration(min)
2013::2 -- GE2/1/4 1234
1230::22 -- GE2/1/4 10
Slot 1:
IPv6 address VPN instance Detected on Duration(min)
2013::2 -- GE2/1/4 1234
1230::22 -- GE2/1/4 10
# (MSR1000/MSR2000/MSR3000.) Display the number of IPv6 scanning attackers.
<Sysname> display attack-defense scan attacker ipv6 count
Totally 3 attackers.
# (MSR4000.) Display the number of IPv6 scanning attackers.
<Sysname> display attack-defense scan attacker ipv6 count
Slot 0: