HP MSR SERIES Command Reference

331
Usage guidelines
This function applies only to IPsec SAs negotiated by IKE.
The IPsec SA idle timeout can also be configured in IPsec policy view or IPsec policy template view, which
takes precedence over the global IPsec SA timeout.
Examples
# Set the IPsec SA idle timeout to 600 seconds.
<Sysname> system-view
[Sysname] ipsec sa idle-time 600
Related commands
• display ipsec sa
• sa idle-time
ipsec transform-set
Use ipsec transform-set to create an IPsec transform set and enter IPsec transform set view.
Use undo ipsec transform-set to delete an IPsec transform set.
Syntax
ipsec transform-set transform-set-name
undo ipsec transform-set transform-set-name
Default
No IPsec transform set exists.
Views
System view
Predefined user roles
network-admin
Parameters
transform-set-name: Specifies a name for the IPsec transform set, a case-insensitive string of 1 to 63
characters.
Usage guidelines
An IPsec transform set, part of an IPsec policy, defines the security parameters for IPsec SA negotiation,
including the security protocol, encryption algorithms, and authentication algorithms.
Examples
# Create an IPsec transform set named tran1 and enter its view.
<Sysname> system-view
[Sysname] ipsec transform-set tran1
[Sysname-transform-set-tran1]
Related commands
display ipsec transform-set

HP MSR SERIES Specifications

General

Product Series	MSR Series
Manufacturer	HP
Category	Network Router
Ports	Varies by model
WAN Interfaces	Varies by model
LAN Interfaces	Varies by model
VPN Support	Yes
Firewall	Yes
Dimensions	Varies by model
Weight	Varies by model
Wireless Support	Varies by model
Management	Web-based, CLI
Power Supply	Varies by model
Operating Temperature	0°C to 45°C
Storage Temperature	-40°C to 70°C
Humidity	5% to 95% non-condensing