HP MSR SERIES Command Reference

636
reset blacklist ipv6
Use rest blacklist ipv6 to clear dynamic IPv6 blacklist entries.
Syntax
reset blacklist ipv6 { source-ipv6-address [ vpn-instance vpn-instance-name ] | all }
Views
User view
Predefined user roles
network-admin
network-operator
Parameters
source-ipv6-address: Specifies the IPv6 address for a blacklist entry.
vpn-instance vpn-instance-name: Specifies the MPLS L3VPN instance to which the IPv6 address belongs.
The vpn-instance-name argument is a case-sensitive string of 1 to 31 characters. Do not specify this
option if the IPv6 address is on the public network.
all: Specifies all dynamic IPv6 blacklist entries.
Usage guidelines
This command deletes dynamic IPv6 blacklist entries. To delete manual IPv6 blacklist entries, use the
undo blacklist ipv6 command.
Examples
# Clear all dynamic IPv6 blacklist entries.
<Sysname> reset blacklist ipv6 all
Related commands
display blacklist ipv6
reset blacklist statistics
Use rest blacklist statistics to clear blacklist statistics.
Syntax
reset blacklist statistics
Views
User view
Predefined user roles
network-admin
network-operator
Examples
# Clear blacklist statistics.
<Sysname> reset blacklist statistics

HP MSR SERIES Specifications

General

Product Series	MSR Series
Manufacturer	HP
Category	Network Router
Ports	Varies by model
WAN Interfaces	Varies by model
LAN Interfaces	Varies by model
VPN Support	Yes
Firewall	Yes
Dimensions	Varies by model
Weight	Varies by model
Wireless Support	Varies by model
Management	Web-based, CLI
Power Supply	Varies by model
Operating Temperature	0°C to 45°C
Storage Temperature	-40°C to 70°C
Humidity	5% to 95% non-condensing