EasyManuals Logo

HP MSR SERIES Command Reference

HP MSR SERIES
684 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #658 background imageLoading...
Page #658 background image
644
signature detect
Use signature detect to configure signature detection for single-packet attacks.
Use undo signature detect to remove the signature detection configuration for single-packet attacks.
Syntax
signature detect { fraggle | fragment | impossible | ip-option-abnormal | land | large-icmp |
large-icmpv6 | ping-of-death | smurf | snork | tcp-all-flags | tcp-fin-only | tcp-invalid-flags |
tcp-null-flag | tcp-syn-fin | teardrop | tiny-fragment | traceroute | udp-bomb | winnuke } [ action
{ { drop | logging } * | none } ]
undo signature detect { fraggle | fragment | impossible | ip-option-abnormal | land | large-icmp |
large-icmpv6 | ping-of-death | smurf | snork | tcp-all-flags | tcp-fin-only | tcp-invalid-flags |
tcp-null-flag | tcp-syn-fin | teardrop | tiny-fragment | traceroute | udp-bomb | winnuke }
signature detect icmp-t
ype { icmp-type-value | address-mask-reply | address-mask-request |
destination-unreachable | echo-reply | echo-request | information-reply | information-request |
parameter-problem | redirect | source-quench | time-exceeded | timestamp-reply |
timestamp-request } [ action { { drop | logging } * | none } ]
undo signature detect icmp-type { icmp-type-value | address-mask-reply | address-mask-request |
destination-unreachable | echo-reply | echo-request | information-reply | information-request |
parameter-problem | redirect | source-quench | time-exceeded | timestamp-reply |
timestamp-request }
signature detect icmpv6-type { icmpv6-type-value | destination-unreachable | echo-reply |
echo-request | group-query | group-reduction | group-report | packet-too-big | parameter-problem
| time-exceeded } [ ac
tion { { drop | logging } * | none } ]
undo signature detect icmpv6-type { icmpv6-type-value | destination-unreachable | echo-reply |
echo-request | group-query | group-reduction | group-report | packet-too-big | parameter-problem
| time-exceeded }
signature detect ip-option { option-code | internet-timestamp | loose-source-routing | record-route |
route-alert | security | stream-id | strict-source-routing } [ action { { drop | logging } * | none } ]
undo signature detect ip-option { option-code | internet-timestamp | loose-source-routing |
record-route | route-alert | security | stream-id | strict-source-routing }
signature detect ipv6-ext-header ext-header-value [ action { { drop | logging } * | none } ]
undo signature detect ipv6-ext-header next-header-value
Default
Signature detection is not configured for any single-packet attacks.
Views
Attack defense policy view
Predefined user roles
network-admin
Parameters
fraggle: Specifies the fraggle attack.
fragment: Specifies the fragment attack.

Table of Contents

Other manuals for HP MSR SERIES

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the HP MSR SERIES and is the answer not in the manual?

HP MSR SERIES Specifications

General IconGeneral
Product SeriesMSR Series
ManufacturerHP
CategoryNetwork Router
PortsVaries by model
WAN InterfacesVaries by model
LAN InterfacesVaries by model
VPN SupportYes
FirewallYes
DimensionsVaries by model
WeightVaries by model
Wireless SupportVaries by model
ManagementWeb-based, CLI
Power SupplyVaries by model
Operating Temperature0°C to 45°C
Storage Temperature-40°C to 70°C
Humidity5% to 95% non-condensing

Related product manuals