HP MSR SERIES

645
icmp-type: Specifies an ICMP packet attack by its signature type. You can specify the signature by the
ICMP packet type value or keyword:
• icmp-type-value: Specifies the ICMP type value in the range of 0 to 255.
• address-mask-reply: Specifies the ICMP address mask reply type.
• address-mask-request: Specifies the ICMP address mask request type.
• destination-unreachable: Specifies the ICMP destination unreachable type.
• echo-reply: Specifies the ICMP echo reply type.
• echo-request: Specifies the ICMP echo request type.
• information-reply: Specifies the ICMP information reply type.
• information-request: Specifies the ICMP information request type.
• parameter-problem: Specifies the ICMP parameter problem type.
• redirect: Specifies the ICMP redirect type.
• source-quench: Specifies the ICMP source quench type.
• time-exceeded: Specifies the ICMP time exceeded type.
• timestamp-reply: Specifies the ICMP timestamp reply type.
• timestamp-request: Specifies the ICMP timestamp request type.
icmpv6-type: Specifies an ICMPv6 packet attack by its signature type. You can specify the signature by
the ICMPv6 packet type value or keyword.
• icmpv6-type-value: Specifies the ICMPv6 type value in the range of 0 to 255.
• destination-unreachable: Specifies the ICMPv6 destination unreachable type.
• echo-reply: Specifies the ICMPv6 echo reply type.
• echo-request: Specifies the ICMPv6 echo request type.
• group-query: Specifies the ICMPv6 group query type.
• group-reduction: Specifies the ICMPv6 group reduction type.
• group-report: Specifies the ICMPv6 group report type.
• packet-too-big: Specifies the ICMPv6 packet too big type.
• parameter-problem: Specifies the ICMPv6 parameter problem type.
• time-exceeded
: Specifies the ICMPv6 time exceeded type.
impo
ssible: Specifies the IP impossible packet attack.
ip-option: Specifies an IP option. You can specify the IP option by its value or keyword:
• option-code: Specifies the IP option value in the range of 0 to 255.
• internet-timestamp: Specifies the timestamp option.
• loose-source-routing: Specifies the loose source routing option.
• record-route: Specifies the record route option.
• route-alert: Specifies the route alert option.
• security: Specifies the security option.
• stream-id: Specifies the stream identifier option.
• strict-source-routing: Specifies the strict source route option.
ip-option-abnormal: Specifies the abnormal IP option attack.