HP MSR SERIES Command Reference

383
SSH commands
Some MSR routers support the FIPS mode that complies with NIST FIPS 140-2 requirements. Support for
features, commands, and parameters might differ in FIPS mode and non-FIPS mode. For more
information about FIPS mode, see Security Configuration Guide.
SSH server commands
display ssh server
Use display ssh server on an SSH server to display the SSH server status or sessions.
Syntax
display ssh server { session | status }
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
session: Displays the SSH server sessions.
status: Displays the SSH server status.
Examples
# Display the SSH server status.
<Sysname> display ssh server status
SSH server: Disable
SSH version : 1.99
SSH authentication-timeout : 60 second(s)
SSH server key generating interval : 0 hour(s)
SSH authentication retries : 3 time(s)
SFTP server: Disable
SFTP server Idle-Timeout: 10 minute(s)
Table 48 Command output
Field Descri
p
tion
SSH server Whether the SSH server function is enabled.
SSH version
SSH protocol version.
When the SSH supports SSH1, the protocol version is 1.99.
Otherwise, the protocol version is 2.
SSH authentication-timeout Authentication timeout timer.

HP MSR SERIES Specifications

General

Product Series	MSR Series
Manufacturer	HP
Category	Network Router
Ports	Varies by model
WAN Interfaces	Varies by model
LAN Interfaces	Varies by model
VPN Support	Yes
Firewall	Yes
Dimensions	Varies by model
Weight	Varies by model
Wireless Support	Varies by model
Management	Web-based, CLI
Power Supply	Varies by model
Operating Temperature	0°C to 45°C
Storage Temperature	-40°C to 70°C
Humidity	5% to 95% non-condensing