HP MSR SERIES

580
Related commands
attack-defense policy
display attack-defense policy ip
Use display attack-defense policy ip to display information about IPv4 addresses protected by flood
attack detection and prevention.
Syntax
MSR1000/MSR2000/MSR3000:
display attack-defense policy policy-name { ack-flood | dns-flood | fin-flood | flood | http-flood |
icmp-flood | rst-flood | syn-ack-flood | syn-flood | udp-flood } ip [ ip-address [ vpn
vpn-instance-name ] ] [ count ]
MSR4000:
display attack-defense policy policy-name { ack-flood | dns-flood | fin-flood | flood | http-flood |
icmp-flood | rst-flood | syn-ack-flood | syn-flood | udp-flood } ip [ ip-address [ vpn
vpn-instance-name ] ] [ slot slot-number ] [ count ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
policy-name: Specifies an attack defense policy by its name. The policy name is a case-insensitive string
of 1 to 31 characters. Valid characters include uppercase and lowercase letters, digits, underscores (_),
and hyphens (-).
ack-flood: Specifies ACK flood attack.
dns-flood: Specifies DNS flood attack.
fin-flood: Specifies FIN flood attack.
flood: Specifies all IPv4 flood attacks.
http-flood: Specifies HTTP flood attack.
icmp-flood: Specifies ICMP flood attack.
rst-flood: Specifies RST flood attack.
syn-ack-flood: Specifies SYN-ACK flood attack.
syn-flood: Specifies SYN flood attack.
udp-flood: Specifies UDP flood attack.
ip-address: Specifies a protected IPv4 address. If no IPv4 address is specified, this command displays
information about all protected IPv4 addresses.
vpn-instance vpn-instance-name: Specifies the MPLS L3VPN instance to which the IPv4 address belongs.
The vpn-instance-name argument is a case-sensitive string of 1 to 31 characters. Do not specify this
option if the IPv4 address is on the public network.