23
undo authorization portal
Default
The default authorization method of the ISP domain is used for portal users.
Views
ISP domain view
Predefined user roles
network-admin
Parameters
local: Performs local authorization.
none: Does not perform authorization. An authenticated portal user directly accesses the network.
radius-scheme radius-scheme-name: Specifies a RADIUS scheme by its name, a case-insensitive string of
1 to 32 characters.
Usage guidelines
The RADIUS authorization configuration takes effect only when the authentication method and
authorization method of the ISP domain use the same RADIUS scheme.
You can specify one primary authorization method and multiple backup authorization methods.
When the default authorization method is invalid, the device attempts to use the backup authorization
methods in sequence. For example, the authorization portal radius-scheme radius-scheme-name local
none command specifies the default RADIUS authorization method and two backup methods (local
authorization and no authorization). The device performs RADIUS authorization by default and performs
local authorization when the RADIUS server is invalid. The device does not perform authorization when
both of the previous methods are invalid.
Examples
# Configure ISP domain test to use local authorization for portal users.
<Sysname> system-view
[Sysname] domain test
[Sysname-isp-test] authorization portal local
# Configure ISP domain test to use RADIUS scheme rd for portal user authorization and use local
authorization as the backup.
<Sysname> system-view
[Sysname] domain test
[Sysname-isp-test] authorization portal radius-scheme rd local
Related commands
• authorization default
• local-user
• radius scheme
authorization ppp
Use authorization ppp to configure the authorization method for PPP users.
Use undo authorization ppp to restore the default.
To Next Page
Loading...
Need help?
General
