HP MSR SERIES Command Reference

632
Examples
# Configure ICMPv6 flood attack detection for 2012::12 in attack defense policy atk-policy-1.
<Sysname> system-view
[Sysname] attack-defense policy atk-policy-1
[Sysname-attack-defense-policy-atk-policy-1] icmpv6-flood detect ipv6 2012::12 threshold
2000
Related commands
• icmpv6-flood action
• icmpv6-flood detect non-specific
• icmpv6-flood threshold
icmpv6-flood detect non-specific
Use icmpv6-flood detect non-specific to enable ICMPv6 flood attack detection for non-specific IPv6
addresses.
Use undo icmpv6-flood detect non-specific to restore the default.
Syntax
icmpv6-flood detect non-specific
undo icmpv6-flood detect non-specific
Default
ICMPv6 flood attack detection is not enabled for non-specific IPv6 addresses.
Views
Attack defense policy view
Predefined user roles
network-admin
Usage guidelines
This command enables global ICMPv6 flood attack detection. It applies to all IPv6 addresses except for
those specified by the icmpv6-flood detect ipv6 command. The system uses the global trigger threshold
set by the icmpv6-flood threshold command and global actions specified by the icmpv6-flood action
command.
Examples
# Enable ICMPv6 flood attack detection for non-specific IPv6 addresses in attack defense policy
atk-policy-1.
<Sysname> system-view
[Sysname] attack-defense policy atk-policy-1
[Sysname-attack-defense-policy-atk-policy-1] icmpv6-flood detect non-specific
Related commands
• icmpv6-flood action
• icmpv6-flood detect ipv6
• icmpv6-flood threshold

HP MSR SERIES Specifications

General

Product Series	MSR Series
Manufacturer	HP
Category	Network Router
Ports	Varies by model
WAN Interfaces	Varies by model
LAN Interfaces	Varies by model
VPN Support	Yes
Firewall	Yes
Dimensions	Varies by model
Weight	Varies by model
Wireless Support	Varies by model
Management	Web-based, CLI
Power Supply	Varies by model
Operating Temperature	0°C to 45°C
Storage Temperature	-40°C to 70°C
Humidity	5% to 95% non-condensing