HP MSR SERIES Command Reference

190
Max secure MAC addresses : 64
Current secure MAC addresses : 1
Authorization : Permitted
Table 20 Command output
Field Descri
p
tion
Port security Status of the port security feature: Enabled or Disabled.
AutoLearn aging time Sticky MAC address aging timer, in minutes.
Disableport timeout Silence period (in seconds) of the port that receives illegal packets.
MAC move
Status of MAC move:
• If the function is enabled, this field displays Permitted.
• If the function is disabled, this field displays Denied.
OUI value list List of OUI values allowed for authentication.
Port mode
Port security mode:
• noRestrictions.
• autoLearn.
• macAddressWithRadius.
• macAddressElseUserLoginSecure.
• macAddressElseUserLoginSecureExt.
• secure.
• userLogin.
• userLoginSecure.
• userLoginSecureExt.
• macAddressOrUserLoginSecure.
• macAddressOrUserLoginSecureExt.
• userLoginWithOUI.
For more information about port security modes, see Security
Configuration Guide.
NeedToKnow mode
Need to know (NTK) mode:
• NeedToKnowOnly—Allows only unicast packets with
authenticated destination MAC addresses.
• NeedToKnowWithBroadcast—Allows only unicast packets and
broadcasts with authenticated destination MAC addresses.
• NeedToKnowWithMulticast—Allows unicast packets, multicasts,
and broadcasts with authenticated destination MAC addresses.
• Disabled—NTK is disabled.
Intrusion protection mode
Intrusion protection action:
• BlockMacAddress—Adds the source MAC address of the illegal
packet to the blocked MAC address list.
• DisablePort—Shuts down the port that receives illegal packets
permanently.
• DisablePortTemporarily—Shuts down the port that receives illegal
packets for some time.
• NoAction—Does not perform intrusion protection.
Max secure MAC addresses
Maximum number of secure MAC addresses (or online users) that
port security allows on the port.

HP MSR SERIES Specifications

General

Brand	HP
Model	MSR SERIES
Category	Network Router
Language	English