HP MSR SERIES

305
Syntax
display ipsec profile [ profile-name ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
profile-name: Specifies an IPsec profile by its name, a case-insensitive string of 1 to 63 characters.
Usage guidelines
If you do not specify any parameters, this command displays information about all IPsec profiles.
Examples
# Display information about all IPsec profiles.
<Sysname> display ipsec profile
-----------------------------------------------
IPsec profile: profile
Mode: manual
-----------------------------------------------
Description:
Transform set: prop1
Inbound AH setting:
AH SPI: 12345 (0x00003039)
AH string-key:
AH authentication hex key: ******
Inbound ESP setting:
ESP SPI: 23456 (0x00005ba0)
ESP string-key:
ESP encryption hex-key: ******
ESP authentication hex-key: ******
Outbound AH setting:
AH SPI: 12345 (0x00003039)
AH string-key:
AH authentication hex key: ******
Outbound ESP setting:
ESP SPI: 23456 (0x00005ba0)
ESP string-key:
ESP encryption hex key: ******
ESP authentication hex key: ******
Table 38 Command output
Field Descri
p
tion
IPsec profile IPsec profile name.