HP MSR SERIES Command Reference

451
Views
User view
Predefined user roles
network-admin
network-operator
Parameters
direction: Specifies the direction of the interface.
inbound: Specifies the inbound direction.
outbound: Specifies the outbound direction.
interface interface-type interface-number: Specifies an interface by its type and number.
name application-name: Specifies an application protocol by its name, a case-insensitive string of 1 to
63 characters.
Usage guidelines
If you do not specify any options or keywords, this command displays statistics for application protocols
on all interfaces in both inbound and outbound directions.
This command displays statistics for application protocols only after the application statistics function is
enabled on the specified interfaces. Disabling the application statistics function on the specified
interfaces deletes the corresponding application statistics.
You can display statistics for application protocols based on certain criteria, including application
protocol names, interface directions, interface names, or a combination of the criteria.
Examples
# Display application statistics for all interfaces.
<Sysname> display application statistics
Interface : GigabitEthernet2/1/1
Application In/Out Packets Bytes PPS BPS
appaaaaasg IN 190023111111111111 252334402111111111 2342222222 3411222222
OUT 170034 270011351 3211
451134
app2 IN 2195 18560000 300
654222
OUT 21986666666 655555555123123101 55551
5454125111
aPP3 IN 2195 17560000 300 45161
OUT 21986666666 5555555551231231 55551
5454125111
Interface : GigabitEthernet2/1/2
Application In/Out Packets Bytes PPS BPS
app4 IN 1900231111111 252334402111 2342222222 3411222222
OUT 170034 270011351 3211 451134
app2 IN 2195 18560000 300 654222
OUT 21986666666 65555555512 55551 45412
App123456981200 IN 2195 17560000 300 45161
123456789012300 OUT 21986666666 5555555551231231 55551 54541251

HP MSR SERIES Specifications

General

Brand	HP
Model	MSR SERIES
Category	Network Router
Language	English