HP MSR SERIES Command Reference

510
range port1 port2: Configures a port object with a port range starting with port1 and ending with port2.
The value range for the port1 and port2 arguments is 0 to 65535.
group-object object-group-name: Specifies a port object group to be referenced by its name, a
case-insensitive string of 1 to 31 characters.
Usage guidelines
This command fails if you use it to configure or change a port object to be identical with an existing
object.
This command creates a port object if the specified object ID does not exist. Otherwise, the command
overwrites the configuration of the specified object.
When you use the lt port option, follow these guidelines:
• The value of port cannot be 0.
• If the value of port is 1, the system configures the object with a port number of 0.
• If the value of port is in the range of 2 to 65535, the system configures the object with a port number
range of [0, port–1].
When you use the gt port option, follow these guidelines:
• The value of port cannot be 65535.
• If the value of port is 65534, the system configures the object with a port number of 65535.
• If the value of port is in the range of 0 to 65533, the system configures the object with a port number
range of [port+1, 65535].
When you use the range port1 port2 option, follow these guidelines:
• If port1 is equal to port2, the system configures the object with the port number port1.
• If port1 is smaller than port2, the system configures the object with the port number range.
• If port1 is greater than port2, the system changes the range to [port2, port1] and configures the
object with the changed port number range.
When you use the group-object object-group-name option, follow these guidelines:
• The object group to be referenced must be a port object group.
• If the specified object group does not exist, the system creates a port object group with the name
you specified and references the object group for the object.
• Two object groups cannot reference each other at the same time.
• The system supports up to five reference hierarchy layers. For example, if groups 1, 2, 3, 4, and 5
use groups 2, 3, 4, 5, and 6, respectively, gro
up 6 cannot use another group and group 1 cannot
be used by another group.
Examples
# Configure a port object with a port number of 100.
<Sysname> system-view
[Sysname] object-group port portgroup
[Sysname-obj-grp-port-portgroup] port eq 100
# Configure a port object with a port number smaller than 20.
<Sysname> system-view
[Sysname] object-group port portgroup
[Sysname-obj-grp-port-portgroup] port lt 20
# Configure a port object with a port number greater than 60000.

HP MSR SERIES Specifications

General

Product Series	MSR Series
Manufacturer	HP
Category	Network Router
Ports	Varies by model
WAN Interfaces	Varies by model
LAN Interfaces	Varies by model
VPN Support	Yes
Firewall	Yes
Dimensions	Varies by model
Weight	Varies by model
Wireless Support	Varies by model
Management	Web-based, CLI
Power Supply	Varies by model
Operating Temperature	0°C to 45°C
Storage Temperature	-40°C to 70°C
Humidity	5% to 95% non-condensing