HP ProCurve 5400zl

■ detailed -- Show the detailed configuration of Web Authentication. (p. 546)
■ web-server -- Show the web server-related configuration items. (p. 610)
■ clients -- Show the current web client session statistics. (p. 538)
■ -- Specify ports for which Web Authentication information will be shown. ([ethernet]
PORT-LIST) (p. 525)
■ detailed -- Show the current web client session detailed statistics. (p. 546)
■ config -- Show the current configuration of Web Authentication. (p. 540)
■ -- Specify ports for which Web Authentication information will be shown. ([ethernet]
PORT-LIST) (p. 525)
■ auth-server -- Show the authentication server-related configuration items. (p. 532)
■ detailed -- Show the detailed configuration of Web Authentication. (p. 546)
■ web-server -- Show the web server-related configuration items. (p. 610)
■ auth-server -- Show the authentication server-related configuration items. (p. 532)
■ web-server -- Show the web server-related configuration items. (p. 610)
■ show port-security -- Show a table describing port security settings (p. 581)
■ intrusion-log -- Show the intrusion log records. (p. 561)
■ port-list -- Show a table describing port security settings ([ethernet] PORT-LIST) (p. 578)
■ show power-over-ethernet -- Show port poe configuration and status information (p. 581)
■ brief -- Show summary of poe status (p. 535)
■ port-list -- Show the ports' poe status ([ethernet] PORT-LIST) (p. 578)
■ slot -- Show summary of poe status (SLOT-ID-RANGE) (p. 591)
■ port-list -- Show the ports' poe status ([ethernet] PORT-LIST) (p. 578)
■ slot -- Show poe information of specified slot (SLOT-ID-RANGE) (p. 591)
■ show qinq -- show qinq configuration details (p. 582)
■ show qos -- Show various QoS settings (p. 582)
■ device-priority -- Show the device priority table (priority based on the IP addresses) (p. 548)
■ dscp-map -- Show mappings between DSCP policy and 802 (p. 549)
■ port-priority -- Show the port-based priority table (p. 580)
■ protocol-priority -- Show the protocol priority (p. 582)
■ queue-config -- Displays outbound port queues configuration information. (p. 583)
■ resources -- Show the qos resources (p. 585)
■ tcp-udp-port-priority -- Show TCP/UDP port priorities (p. 598)
■ type-of-service -- Show QoS priorities based on IP Type-of-Service (p. 601)
■ vlan-priority -- Show the VLAN-based priority table (p. 607)
■ show radius -- Show RADIUS status and statistics information (p. 583)
■ accounting -- Show RADIUS accounting statistics (p. 528)
■ authentication -- Show RADIUS authentication statistics (p. 531)
■ dyn-authorization -- Show RADIUS dynamic authorization statistics (p. 549)
■ host -- Show statistics information for the RADIUS host (IP-ADDR) (p. 555)
■ dyn-authorization -- (p. 549)
■ show rate-limit -- Show rate limit maximum percentages (p. 584)
■ all -- Show limits for all traffic. (p. 529)
■ detailed -- Show Inbound Radius Override details. (p. 546)
■ port-list -- Specify ports for which information will be shown. ([ethernet] PORT-LIST) (p.
578)
■ bcast -- Show limits for ingress broadcast traffic. (p. 534)
■ detailed -- Show Inbound Radius Override details. (p. 546)
■ port-list -- Specify ports for which information will be shown. ([ethernet] PORT-LIST) (p.
578)
■ icmp -- Show only limits for icmp traffic. (p. 556)
■ detailed -- Show Inbound Radius Override details. (p. 546)
■ port-list -- Specify ports for which information will be shown. ([ethernet] PORT-LIST) (p.
578)
519© 2009 Hewlett-Packard Development Company, L.P.
showCommand Line Interface Reference Guide