HTA HT2000H - Page 19

HT2000H_en_n.doc Page 19 of 167
Shaking method sussultatory
Shaker speed from very low to very high
Shaking cycles on/off, from 0 to 9.9min
HT2000HT
Oven positions 3
Oven Temperature off, from 40°C3 to 300°C
Incubation time from 0 to 999min step 1min
Shaking method orbital
Shaker speed from very low to very high
Shaking cycles on/off, from 0 to 9.9min
Sampling
Syringe Temperature off, from 40°C to 150°C (standard version
syringe) or 250°C (HT version syringe installed
on HT2000HT)
Sample volume 0.01ml stepwise
Pull Up Strokes up to 15 strokes
Sample speed from 0.1 to 100ml/min (40ml/min for 1ml syringe)
Injection
Injection speed from 0.5 to 100ml/min (40ml/min for 1ml
syringe)
Pre/Post injection dwell time from 0 to 99s
Enrichment cycles up to 15
Dwell time between enrichment cycle from 0 to 100min
Syringe purge
Flush time from 0 to 99min
Purge temperature off, from 40°C to 150°C (standard version
syringe) or 250°C (HT version syringe installed
on HT2000HT)
1.9 PC software requirements (HTA Autosampler Manager)
See HTA Autosampler Manager Online Help for the related PC specifications.