Figure 3-20 Removing the lower riser card tray of riser module 3
Step 8 Open the PCIe card latch. See (1) in Figure 3-21.
Figure 3-21 Removing a PCIe card from a riser card
Step 9 Pull out the PCIe card. See (2) in Figure 3-21.
Step 10 Place the removed PCIe cards and riser card tray in ESD bags.
Step 11 If you do not want to install another riser card tray immediately, install a filler panel. See
Figure 3-22, Figure 3-23, or Figure 3-24.
TaiShan 2280 V2 Server
User Guide
3 Basic Operations
Issue 01 (2019-07-01) Copyright © Huawei Technologies Co., Ltd. 46
To Next Page
Loading...
