NOTE
l The default iBMC user account is Administrator.
l U-Boot is a piece of underlying software used to configure basic settings, for example, initializing
hardware devices and setting up memory space mapping, to prepare for commissioning the OS.
l To ensure system security, change your initial password at your first login and change the password
periodically.
l A simple password is easy to crack, which makes the system vulnerable. You are advised to use a
password that meets complexity requirements or to enable the password complexity check function.
l The password complexity check function is enabled by default.
You can change an iBMC user password on the iBMC WebUI or CLI. The following
describes how to change a user password on the iBMC WebUI. For details about operations
on the iBMC CLI, see the TaiShan Rack Server iBMC User Guide.
Change the initial password of the default iBMC user
Step 1 On the iBMC WebUI, choose Configuration > Local Users.
The Local Users page is displayed.
Step 2 Click
next to the user whose password is to be changed. See Figure 4-21.
Figure 4-21 Local Users page
Step 3 Change the user password by following on-screen instructions.
A password must meet the following complexity requirements:
l Contains 8 to 20 characters.
l Contains at least one space or one of the following special characters:
`~!@#$%^&*()-_=+\|[{}];:'",<.>/?
l Contains at least two types of the following characters:
– Lowercase letters: a to z
– Uppercase letters: A to Z
– Digits: 0 to 9
l Cannot be the same as the user name or user name in reverse order.
----End
TaiShan 2280 V2 Server
User Guide
4 Setup
Issue 01 (2019-07-01) Copyright © Huawei Technologies Co., Ltd. 76
To Next Page
Loading...
